vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace upper lock for rear seat backrest locking - left side (L08 / L35 / L48) > < Seat bench, complete removal and installation or replacement - L35 (slideable seat bench)

Astra H

Replace upper lock for rear seat backrest locking - right side (L08 / L35 / L48)

For L35, applies to non-adjustable rear seats.

  Remove

1.   Remove bench seat
•   Unlock 2x brackets (1) front
•   Hang off 2x bench seat from rear bracket
– Push seat simultaneously backwards and upward
Object Number: 8125805 Size: DEFAULT


2.   Remove head restraint
3.   Remove rear seat backrest
•   Unscrew bolt at front
– Remove belt buckle
•   Unscrew 2x bolts, side
•   Fold down rear seat backrest
•   Unscrew bolt at back
Object Number: 7361518 Size: DEFAULT


4.   Remove rear seat backrest
•   Remove rear seat backrest from side guide
Note:   2nd mechanic required.
Object Number: 3446775 Size: DEFAULT


5.   Detach rear seat backrest cover
•   Remove 9x clips (l)
6.   Detach right bracket
•   Unscrew 2x bolts (1) (ll)
Object Number: 8230438 Size: DEFAULT


7.   Detach upholstery covering all the way round
8.   Detach head restraint guide sleeve
•   Detach head restraint guide sleeve 2x
9.   Remove upholstery covering
•   Detach 7x clamps
– Remove upholstery covering
Object Number: 7361520 Size: DEFAULT


10.   Detach release handle panel seat backrest
11.   Detach lock, rear seat backrest
•   Drill out 4x rivet
•   Pull Bowden cable from fastening plate
Object Number: 8231331 Size: DEFAULT


  Install

12.   Attach lock, rear seat backrest
•   Insert Bowden cable into fastening plate
•   Attach 4x rivets
13.   Attach release handle panel seat backrest
14.   Attach upholstery covering
•   Position upholstery covering
– Attach 7x clamps
15.   Attach head restraint guide sleeve
•   Engage 2x head restraint guide sleeves (audible click)
16.   Insert surrounding upholstery covering
17.   Attach right bracket
•   Tighten 2x bolt 25 Nm
18.   Attach rear seat backrest cover
•   Attach 9x clips
19.   Install headrest
20.   Insert rear seat backrest
21.   Install rear seat backrest
•   Tighten 2x bolts, side 20 Nm
•   Tighten screw at back 20 Nm
•   Fold down rear seat backrest
•   Insert belt buckle
•   Tighten front screw 20 Nm
Note:   Use screw locking compound
22.   Install rear seat
•   Insert rear seat cushion and position

Replace upper lock for rear seat backrest locking - left side (L08 / L35 / L48) > < Seat bench, complete removal and installation or replacement - L35 (slideable seat bench)