|
Seat Belt with Automatic Retractor - Centre Rear
Seat, Replace - L48
 Remove
| 1. |
Remove bench seat
| • |
Unlock 2x brackets (1) front
|
| • |
Hang off 2x bench seat from rear bracket
| – |
Push seat simultaneously backwards and upward
|
|
|
|
|
| 2. |
Remove rear seat backrest
| • |
Unscrew 3x bolts at the front
|
| • |
Fold down rear seat backrest
|
| • |
Unscrew 3x bolts at the back
|
|
|
|
| 3. |
Remove rear seat backrest
| • |
Remove rear seat backrest from side guide
Note: 2nd mechanic
required
|
|
|
|
| 4. |
Detach lower C-pillar panel
| • |
Unclip C-pillar panel and remove (arrows)
|
|
|
|
| 5. |
Detach seat belt on lower C-pillar
|
| 6. |
Remove upper C-pillar panelling
| • |
Unclip C-pillar panelling
|
| • |
Remove C-pillar panelling
|
|
|
|
| 7. |
Detach seat belt
| • |
Unscrew seat belt (l) from deflection sheave (II)
|
| • |
Unscrew seat belt with reel retractor (lll) and remove
|
|
|
|
Install
| 8. |
Install seat belt
| • |
Insert seat belt with reel retractor and tighten bolts
|
| • |
Insert seat belt with reel retractor and tighten
|
|
| 9. |
Refit C-pillar panelling
| • |
Clip in C-pillar panelling
|
|
| 10. |
attach seat belt on lower C-pillar
| • |
Tighten bolt 35 Nm
Note: Use screw locking
compound
|
|
| 11. |
Attach lower C-pillar panel
|
| 12. |
Insert rear seat backrest
| • |
Insert rear seat backrest into side guide
Note: 2nd mechanic
required
|
|
| 13. |
Install rear seat backrest
| • |
Fold down rear seat backrest
|
| • |
Tighten 3x front screws with belt buckle
Note: Use screw locking
compound
|
|
| 14. |
Install rear seat
| • |
Insert rear seat cushion and position
|
|
|
