|
Removing and installing engine vent pipe
 Remove
| 1. |
Remove air intake manifold
|
| 2. |
Remove engine vent hose from cylinder head cover
|
| 3. |
Detach air intake pipe from air intake hose
|
| 4. |
Detach air intake pipe from turbocharger
| • |
Release clamp (3)
Note: Seal air intake
pipe at turbocharger
|
|
| 5. |
Remove air intake pipe
|
|
|
| 6. |
Remove engine vent hose (3)
|
| 7. |
Detach front coolant pipe (1) with engine transport shackle
from cylinder head and put to side
|
| 8. |
Detach heat shield (2) from exhaust manifold and remove
|
|
|
| 9. |
Remove 2x bolt (1) and remove engine vent flange.
|
|
|
| 10. |
Clean sealing surfaces.
|
Install
| 11. |
Fit new gasket (2)
Note: Note installation
position, bead (3) must point upward towards engine vent flange
|
| 12. |
Attach engine vent flange to cylinder block 25 Nm
|
| 13. |
Attach heat shield to exhaust manifold 9 Nm
|
| 14. |
Attach front coolant pipe with engine transport shackle to
cylinder head 20 Nm
|
| 15. |
Install engine vent hose
|
| 16. |
Remove seal from turbocharger air intake pipe
|
| 17. |
Attach engine vent hose to cylinder head cover
|
| 18. |
Attach air intake pipe to turbocharger
|
| 19. |
Attach air intake pipe to air intake hose
|
|
