|
Replace particle filter temperature sensor
 Remove
| 1. |
Raise vehicle by its full height
|
| 2. |
Detach the lower engine cover and right engine splash guard
|
| 3. |
Unplug wiring harness plug of particle filter temperature
sensor (1)
| • |
Unclip wiring harness from bracket
|
|
|
|
| 4. |
7x unclip wiring harness of particle filter temperature
sensor
| • |
From rear engine damping block
|
|
| 5. |
Remove particle filter temperature sensor (1)
| • |
Unscrew temperature sensor
|
|
|
|
Install
| 6. |
Install particle filter temperature sensor
| • |
Tighten temperature sensor 55 Nm
|
|
| 7. |
7x clip in wiring harnesses
| • |
At rear engine damping block
|
|
| 8. |
Connect wiring harness plug of particle filter temperature
sensor
| • |
Clip wiring harness plug into bracket
|
|
| 9. |
Install lower engine cover and right engine splash guard
|
| 10. |
Lower vehicle by its full height
|
| 11. |
Programming the temperature sensor with Tech 2 
|
|
