|
Engine does not start, starter runs normal
|
Perform the following tests in the given order until a defect is found.
Data List
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1. Z 12 XEP, Z 14 XEP, Z 14 XEL
- Check the following data list parameters:
Actuator Tests
- Select the following Functional System on the diagnostic tester:
Motronic 7.6.1. Z 12 XEP, Z 14 XEP, Z 14 XEL
- Perform the following Actuator Tests:
Function Checks
- After successful test/fault repair proceed to the next test step
|
|
Engine does not start, starter slow / does not turn
|
Perform the following tests in the given order until a defect is found.
Fuses
- Check the following fuses for proper operation:
FE18 Fuse
- If fuse FE18 is defective:
Data List
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
Function Checks
Perform the following troubleshooting:
- After successful test/fault repair proceed to the next test step
|
