|
Fluid Temperature Sensor, Remove and Install
(AF22)
 Remove
| 2. |
Disconnect wiring harness plug (1) for fluid temperature
sensor
|
| 3. |
Detach cover plate (2) from valve body cover and
transmission
|
| 4. |
Remove fluid temperature sensor (arrow)
Note: Place collecting
pan underneath.
|
|
|
Install
| 5. |
Attach fluid temperature sensor (arrow) with new seal ring to
transmission 10 Nm
| • |
Attach cover plate (2) to valve body cover and transmission
25 Nm
|
|
Important: Ensure that cables are
laid correctly.
|
| 6. |
Connect wiring harness plug (1) for fluid temperature
sensor
|
| 7. |
Check transmission fluid level 
Note: Correct if
necessary.
|
|
|
| 9. |
Program volatile memories
|
|
