|
Test
|
Work Order Description
|
Nominal Value
|
|
T001
|
Tester Display SLT (Solenoid Valve) Control Test
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 1, 3 (XC61)
|
|
|
|
T002
|
Tester Display SLU Test (Solenoid Valve-TCC)
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 4, 9 (XC61)
|
|
|
|
T003
|
Tester Display SLC1 (Solenoid Valve) Control Test
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 10, 11 (XC61)
|
|
|
|
T004
|
Tester Display SLC2 (Solenoid Valve) Control Test
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 17, 18 (XC61)
|
|
|
|
T005
|
Tester Display SLC3 (Solenoid Valve) Control Test
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 14, 22 (XC61)
|
|
|
|
T006
|
Tester Display SLB1 (Solenoid Valve) Control Test
|
- Ignition ON
- Engine OFF
- Vehicle stationary
- Brake pedal actuated
- Parking brake applied
- Selector lever in position N
- Press corresponding key in the system main menu to call up ECU Control Tests, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- After the test is started, the corresponding component can be actuated using the soft keys.
|
|
|
|
The value changes from minimum to maximum
|
|
|
The value changes from maximum to minimum
|
Concerned Terminals:
TCM: 16, 21 (XC61)
|
|
|
