|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
SLM (Shift Lever Module)
- Check the following data list parameters:
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
- Select the following Functional System on the diagnostic tester:
AF 40-6 Electronic 6-Speed Automatic Transmission
Check the following data list parameters:
-
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
