The engine races up but the car does not start or starts delayed
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Check the following data list parameters:
-
-
-
-
-
-
-
Mechanical function check
- Check the following component for proper operation:
Clutch Central Release Mechanism Manual Transmission
Additional Functions
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Perform the following Additional Functions:
After successful test/fault repair proceed to the next test step
|
The vehicle does not creep (i.e. it drives not off at idle speed, gear engaged and brake pedal not actuated)
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Check the following data list parameters:
-
-
-
-
-
-
-
Additional Functions
- Perform the following Additional Functions:
After successful test/fault repair proceed to the next test step
|