|
The engine can not be started in selector lever position N
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Check the following data list parameters:
-
-
After successful test/fault repair proceed to the next test step
|
|
The engine can be started in selector lever position A/M, R
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
MTA (Easytronic) (M20-6MTA/M32-6MTA)
- Check the following data list parameters:
-
-
After successful test/fault repair proceed to the next test step
|
