|
Replace gearshift cable clamping pieces
(M20/M32)
 Remove
| 1. |
Remove manual shift lever
|
| 2. |
Detach 2 clamping pieces (1) from manual shift lever
| • |
Carefully pull off 2 clamping pieces in direction of arrow
|
|
|
|
Install
|
| 3. |
Attach 2 clamping pieces (1) to manual shift lever
| • |
Carefully press 2 clamping pieces into place in direction of
arrow
| – |
Selector clamping piece (white)
|
| – |
Shift connection clamping piece (grey)
|
|
|
|
| 4. |
Install manual shift lever
|
|
