Steering Column Lock Control Module Programming and Setup
The following service procedures require either a programming or
a setup event performed for a complete repair.
Steering Column Lock Control Module Replacement
If the steering column lock control module needs to be replaced,
the following procedures must be performed:
2. |
Perform the SPS function
Steering Column Lock Control Module - Programming and follow the
on-screen instructions. |
3. |
Perform the SPS function
Steering Column Lock Control Module - Configuration & Setup and
follow the on-screen instructions. On the screen Control Module -
Configuration and Setup Function(s), select both ECU
Configuration/Reconfiguration and ECU Setup. |
4. |
Clear DTCs after completing
the programming procedure. |
Steering Column Lock Control Module Reprogramming
If the steering column lock control module needs to be
reprogrammed, the following procedures must be performed:
2. |
Perform the SPS function
Steering Column Lock Control Module - Programming and follow the
on-screen instructions. |
3. |
Clear DTCs after completing
the programming procedure. |
|