vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Diesel Fuel Separator Replacement > < Charge Air Cooler Outlet Air Hose Replacement

Crankshaft Position Sensor Replacement (without Start/Stop System)



2372525




Callout


Component Name


Preliminary Procedure

1. Disconnect the battery negative cable. Refer to . Battery Negative Cable Disconnection and Connection
2. Disconnect the crankshaft position sensor wiring harness plug.


1


Crankshaft Position Sensor Bolt

Caution: Refer to Fastener Caution .

Tighten
9 N·m (80 lb in)


2


Crankshaft Position Sensor

Tip
After replacement of the crankshaft position sensor, use a scan tool to perform the appropriate reset functions. Refer to Engine Control Module Programming and Setup .

 

Diesel Fuel Separator Replacement > < Charge Air Cooler Outlet Air Hose Replacement