vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Barometric Pressure Sensor Replacement > < Engine Control Module Replacement

Fuel Sender Assembly Replacement

Removal Procedure

Warning:  Refer to Gasoline/Gasoline Vapors Warning .

Warning:  Refer to Safety Goggles and Fuel Warning .

Caution: Use care while handling the fuel sender to prevent damage and incorrect fuel level readings.

1. Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .

           2371645



2. Disconnect the fuel sender assembly wiring harness plugs (1).
3. Unclip the 2 fuel sender retainer pins.
4. Remove the fuel sender assembly (2).

Installation Procedure


           2371645



1. Install the fuel sender assembly (2).
2. Connect the fuel sender assembly wiring harness plugs (1).
3. Install the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .

Barometric Pressure Sensor Replacement > < Engine Control Module Replacement