vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Fuel Injection Fuel Feed Pipe Replacement - Fuel Rail to Fuel Injector > < Fuel Feed Pipe Replacement - Fuel Filter to Fuel Feed Pipe

Charge Air Cooler Outlet Air Hose Replacement

Removal Procedure

1. Open the hood.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Unclip the electronic control module bracket and move the engine control module to one side.

           2192008


4. Disconnect the charge air cooler outlet air hose (2) from the throttle body (1).
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
6. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
7. Raise the.
8. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
9. Lower the vehicle.

           2191500


10. Unlock the charge air cooler outlet air hose (1) from the charge air cooler (2).

Installation Procedure


           2191500


1. Install the charge air cooler outlet air hose (1) to the charge air cooler (2).
2. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
3. Raise the vehicle.
4. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .
5. Lower the vehicle.

           2192008


6. Connect the charger air cooler outlet air hose (2) to the throttle body (1).
7. Clip in the electronic control module bracket.
8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
9. Close the hood.

Fuel Injection Fuel Feed Pipe Replacement - Fuel Rail to Fuel Injector > < Fuel Feed Pipe Replacement - Fuel Filter to Fuel Feed Pipe