vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Charge Air Cooler Inlet Air Hose Replacement > < Engine Oil Pressure Indicator Switch Replacement

Exhaust Gas Recirculation Vacuum Regulator Solenoid Valve Replacement - Intake Manifold (1.7L Diesel LPL and LPV)

Removal Procedure

1. Open the hood.

           2192027


2. Disconnect the exhaust gas recirculation vacuum regulator solenoid valve wiring harness plug (1).
3. Remove the 2 exhaust gas recirculation vacuum regulator solenoid valve vacuum hoses (3) from the solenoid valve (2).

           2192028


4. Remove the 2 exhaust gas recirculation vacuum regulator solenoid valve bolts (2).
5. Remove the exhaust gas recirculation vacuum regulator solenoid valve (1).

Installation Procedure


           2192028


1. Install the exhaust gas recirculation vacuum regulator solenoid valve (1).

Caution: Refer to Fastener Caution .

2. Install the 2 exhaust gas recirculation vacuum regulator solenoid valve bolts (2) and tighten to 7 N·m (62 lb in) .

           2192027


3. Connect the exhaust gas recirculation vacuum regulator solenoid valve wiring harness plug (1).
4. Install the 2 exhaust gas recirculation vacuum regulator solenoid valve vacuum hoses (3) to the solenoid valve (2).
5. Close the hood.

Charge Air Cooler Inlet Air Hose Replacement > < Engine Oil Pressure Indicator Switch Replacement