vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Fuel Injection Pump Metering Valve Replacement - 1.7L Diesel LPL and LPV > < Fuel System Cleaning

Exhaust Temperature Sensor Replacement - Position 1 (1.7L Diesel LPL and LPV)



2191901




Callout


Component Name


Preliminary Procedure

1. Open the hood.
2. Remove the front compartment insulator. Refer to . Front Compartment Insulator Replacement
3. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection


1


Exhaust Temperature Sensor - Position 1

Caution: Refer to Fastener Caution .

Procedure

1. Disconnect the exhaust temperature wiring harness plug.
2. After the replacement of exhaust temperature sensor, use a scan tool to perform the appropriate reset function. Refer to . Engine Control Module Programming and Setup

Tighten
45 N·m (33 lb ft)


2


Exhaust Temperature Sensor Wiring Harness Clips (Qty:3)

 

Fuel Injection Pump Metering Valve Replacement - 1.7L Diesel LPL and LPV > < Fuel System Cleaning