Astra J
Fuel Feed Pipe Replacement - Fuel Filter to Fuel Feed PipeSpecial ToolsEN-6015 Closure PlugsFor equivalent regional tools, refer to Special Tools . Removal Procedure
|
| Warning: Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby. |
| Warning: Always wear safety goggles when working with fuel in order to protect the eyes from fuel splash. |
| 1. | Open the hood. |
| 2. | Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . |
| 3. | Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
| 4. | Disconnect the fuel feed pipe (3) from the fuel feed pipe connector (1). Refer to Plastic Collar Quick Connect Fitting Service . |
| 5. | Close all connections with EN-6015 plugs . |
| 6. | Disconnect the fuel feed pipe (2) from the fuel filter connector (1). Refer to Plastic Collar Quick Connect Fitting Service . |
| 7. | Close all connections with EN-6015 plugs . |
Installation Procedure
| 1. | Remove the EN-6015 plugs from all connections. |
| 2. | Connect the fuel feed pipe (2) to the fuel filter connector (1). Refer to Plastic Collar Quick Connect Fitting Service . |
| 3. | Remove the EN-6015 plugs from all connections. |
| 4. | Connect the fuel feed pipe (3) to the fuel feed pipe connector (1). Refer to Plastic Collar Quick Connect Fitting Service . |
| 5. | Lower the vehicle. |
| 6. | Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . |
| 7. | Close the hood. |
