Crankshaft and Bearing Removal
| 1. |
Remove the crankshaft position
sensor bolt (3). |
| 2. |
Remove the crankshaft position
sensor (1) and the crankshaft position sensor seal ring (2).
|
| 3. |
Remove the 12 outer crankshaft
bearing cap tie plate bolts (1). |
| 4. |
Loosen the 10 inner crankshaft
bearing cap tie plate bolts in a sequence as shown. |
| 5. |
Remove and DISCARD the 10
crankshaft bearing cap tie plate bolts (1) |
| |
Remove the crankshaft bearing cap tie plate (2). |
| 6. |
Remove the 4 lower crankshaft
bearings (3) an the lower crankshaft thrust bearing (4).
|
| 7. |
Remove the crankshaft rear oil
seal (5). |
| 8. |
Remove the crankshaft (1), the
4 upper crankshaft bearings (2) and the upper crankshaft thrust
bearing (3). |
|
