Camshaft Position Actuator Solenoid Valve Installation
|
Caution: The camshaft position actuator solenoid valves must be
kept parallel to the engine front cover during removal and
installation. The camshaft position actuator solenoid valves can be
damaged if they become wedged or stuck during this process.
|
| 1. |
Install the 2 camshaft
position actuator solenoid valves (2) and the 2 seal rings (1) by
carefully and evenly pressing. |
| 2. |
Install the 4 camshaft
position actuator solenoid valve bolts (1) and tighten to 8
N·m (71 lb in) . |
| 3. |
The 2 camshaft position
actuator solenoid valves should be installed in the position as
shown (1) and (2). |
|
