Crankshaft Balancer Removal
Special Tools
• |
EN-49979
Crankshaft Shock Mount Retainer |
For equivalent regional tools, refer to
Special Tools .
1. |
Install EN-49979
retainer to EN-956-1 extension .
|
|
Note: The crankshaft
balancer can be incorrectly installed 180° from the required
position. Be sure to note the location of the alignment hole on the
crankshaft balancer prior to removing the crankshaft balancer from
the engine.
|
2. |
Loosen the crankshaft balancer
bolt (4) while fixing the crankshaft balancer (3) with
EN-49979 retainer (1) and EN-956-1
extension (2). |
3. |
Remove and DISCARD the
crankshaft balancer bolt (2). |
4. |
Remove the crankshaft balancer
(1). |
|