Intake Manifold Assemble (LUH,LUJ,LUV w. Returnless Fuel
Syst.)
1. |
Install the evaporative
emission canister purge solenoid valve (3). |
2. |
Install the 2 manifold
absolute pressure sensors (2). |
3. |
Install the 2 manifold
absolute pressure sensor bolts (1) and tighten. |
4. |
Install the fuel injection
fuel rail assembly (3). |
5. |
Install the 2 fuel injection
rail bolts (2) and tighten to 8 N·m (71 lb
in) . |
6. |
Install the fuel injection
rail ground cable nut (1) and tighten. |
7. |
Install a NEW intake manifold
gasket (4). |
|