Automatic Transmission Flex Plate Installation (LDE, LED, LFJ,
LXV, 2H0, LUW, LFH)
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to
Special Tools .
1. |
Clean the automatic
transmission flex plate bolt threads. |
2. |
Install the automatic
transmission flex plate (2) and the EN-652 holder
to hold the automatic transmission flex plate (2). |
3. |
Install the 6 NEW automatic
transmission flex plate bolts (2) and tighten the bolts to
60 N·m (44 lb ft) ± 5° .
|
4. |
Remove the EN-652
holder . |
|