Camshaft Sprocket Removal
Special Tools
For equivalent tools, refer to
Special Tools .
|
Note: A second
technician is required.
|
1. |
Install the EN-6347
holding tool (1) and the EN-956-1 extension
(2) in the exhaust camshaft sprocket. |
2. |
Loosen the locking bolts (3)
from EN-6347 holding tool . |
|
Note: The grooves of
EN-6347 holding tool must locate in the camshaft
sprocket. Check for correct seating.
|
3. |
Tighten the 2 locking bolts
(3). |
4. |
Loosen the exhaust camshaft
sprocket bolt (4) while holding the exhaust camshaft sprocket with
EN-6347 holding tool. |
5. |
Repeat the same procedure at
the intake camshaft sprocket for removal. |
6. |
Remove the 2 camshaft sprocket
bolts (1) and the 2 camshaft sprocket washer (2). |
7. |
Remove the 2 camshaft
sprockets (3). |
|