Vauxhall Astra Engine Flywheel Installation

Engine Flywheel Installation (LDE, LED, LFJ, LXV, 2H0, LUW)

•	EN-652 Flywheel Holder

•	EN-45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools .

1.	Clean the thread in the crankshaft.

2.	Install the flywheel (2).

3.	Install the EN-652 holder (1).

Caution: Refer to Fastener Caution .

Caution: Refer to Torque-to-Yield Fastener Caution .

4.	Install the 6 NEW flywheel bolts (1, 2) and tighten the bolts in 3 passes using the EN-45059 sensor kit :

4.1

First pass to 35 N·m (26 lb ft) .

4.2

Second pass to additional 30° .

4.3

Third pass to an additional 15° .

5.	Remove the EN-652 holder .