Timing Belt Removal (1.6L LLU)
Special Tools
For equivalent regional tools, refer to
Special Tools .
|
Note: The timing belt
drive gear and oil pump housing must align.
|
| 1. |
Turn the crankshaft in the
direction of engine rotation, by the crankshaft balancer bolt, to
cylinder 1 TDC of combustion stroke. |
|
Note: Markings (3) on
EN-6340 locking tool (1, 2) must align.
|
| 2. |
Insert the EN-6340
locking tool (1, 2) into the camshaft sprocket
wheels. |
| 3. |
Install the EN-6333
locking pin (3), apply tension to the timing belt tension
roller (2) in the direction of the arrow, using an Allen key
(1). |
| 4. |
Stop the timing belt
tensioner. |
|
Note: Observe
direction of rotation.
|
| 5. |
Remove the timing belt
(1). |
|
