vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Turbocharger Replacement > < Timing Belt Rear Cover Replacement - 1.6L LLU

Turbocharger Oil Return Hose Replacement

Removal Procedure

1. Open the hood.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Place a drip pan underneath.

           2028377


4. Remove the turbocharger oil return hose clamp (5).
5. Remove the 2 turbocharger oil return hose bolts (2).
6. Remove the turbocharger oil return hose (1) from the turbocharger (4) and from the oil level indicator tube (6).
7. Remove the turbocharger oil return hose seal (3).

Installation Procedure


           2028377


1. Install a NEW turbocharger oil return hose seal (3).
2. Install the turbocharger oil return hose (1) to the turbocharger (4) and to the oil level indicator tube (6).

Caution: Refer to Fastener Caution .

3. Install the 2 turbocharger oil return hose bolts (2) and tighten to 8 N·m (71 lb in) .
4. Install the turbocharger oil return hose clamp (5).
5. Check and correct the engine oil level. For engine oil specifications, refer to Engine Mechanical Specifications .
6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
7. Close the hood.

Turbocharger Replacement > < Timing Belt Rear Cover Replacement - 1.6L LLU