Oil Pump Replacement
Special Tools
EN-46793 Installer
For equivalent regional tools, refer to
Special Tools .
Removal Procedure
|
Note: Mark the
position of the bolts because of the different length.
|
4. |
Remove the 8 oil pump bolts
(1). |
5. |
Remove the oil pump (2) and
the oil pump gasket (3). |
6. |
Remove the crankshaft front
oil seal ring (1) from the oil pump (2). |
Installation Procedure
1. |
Clean the threads and sealing
surfaces. |
2. |
Install a NEW oil pump gasket
(3). |
3. |
Install the oil pump
(2). |
|
Note: Use locking
agent to the (M6x20) bolts.
Leave one bolt out, for the special tool in the timing belt
procedure.
|
4. |
Install the 7 oil pump bolts
(1) and tighten to 9 N·m (80 lb in)
. |
|
Note: Moisten the
crankshaft front oil seal ring with a little silicone grease.
|
5. |
Install the crankshaft front
oil seal ring by using the EN-46793 installer
. |
|