vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Exhaust Pressure Sensor Pipe Installation - LBQ, LBR, LBS, LBX, and LCD > < Engine Mount Bracket Installation

Power Brake Booster Pump Installation

Special Tools

EN-45059   Angle Sensor

For equivalent regional tools, refer to Special Tools .


           2026608



1. Install the power brake booster pump gasket.
2. Install the power brake booster pump (2).

Caution: Refer to Fastener Caution .

3. Install the 4 NEW power brake booster pump bolts (1) and tighten in 2 passes:
  •  First pass to 5 N·m (45 lb in) .
  •  Second pass to 50° using the EN-45059   angle sensor .

Exhaust Pressure Sensor Pipe Installation - LBQ, LBR, LBS, LBX, and LCD > < Engine Mount Bracket Installation