Condition
|
Action
|
DEFINITION: Transmission overheats
|
Low fluid level
|
Inspect for leaks and repair if necessary.
|
Incorrect fluid
|
Replace the fluid with the correct fluid.
|
Restricted Oil Cooler Lines
|
| • |
Inspect for bent or kinked pipes |
| • |
Inspect for pinched or kinked hoses |
| • |
Inspect for cracks or signs of hose overheating
that may cause delamination of the hose |
| • |
Replace faulty oil cooler lines |
|
Internal oil cooler restriction
|
Replace radiator assembly and fluid.
|
Case Assembly oil inlet filter/screen
|
Remove the inlet cooler line seal from the case assembly. Inspect
for foreign material trapped by the case inlet filter/screen. Clean
the passage to remove the foreign material from the case inlet
screen. If unable to remove the foreign material, the screen will
have to be removed from the case assembly and cleared manually
outside of the case assembly.
|
