Clutch Actuator Cylinder Pipe Removal
| 1. |
Loosen the clutch actuator
cylinder pipe nut (1). |
| 2. |
Remove the clutch actuator
cylinder pipe elbow (1) by unclip the retainer (arrow) with
suitable tool. |
| 3. |
Unclip the clutch actuator
cylinder pipe (1) out of the retainer (2) use a screw driver
(arrow). |
| 4. |
Push the clutch actuator
cylinder pipe to the transmission case direction. |
| 5. |
Remove the clutch actuator
cylinder pipe (3) carefully out of the retainer (2) and the clutch
actuator cylinder (1). |
|
Note: The retainer
has always be replaced after removing the clutch actuator cylinder
pipe.
|
| 6. |
Remove and DISCARD the
retainer (1) use pliers (2) and push in direction of arrow.
|
| 7. |
Remove the retainer
(1). |
|
