Bonnet
Emblem, Replace
Note:
For
all Models as of MY '89 or on emblems with position pins and bonnets without
position holes.
Mark
installation position of emblem (arrow = up) for identification.
Remove
position pins completely.
Clean
cementing surface with benzine.
Mark
position of emblem on bonnet with adhesive tape for identification:
Dimension "X"
up to MY '89, x = 12 mm/0.47 in.
as of MY '89, x = 20 mm/0.79 in.
on GSI, x = 17 mm/0.67 in.
Remove
protective foil and cement emblem on.
|