Front Axle Control Arm Support, Replace
Remove
Remove attaching parts.
Disconnect control arm support.
Cut out spot welds (approx. 31).
Install
Prepare welding flange.
Drill bore hole of control arm support to Æ 14.2 mm/0.559 in.
Apply Spot Weld Paint - 90 001 874/15 04 559.
Install Welding Gauge KM-435 and position new component with welding gauge.
Weld in new component.
Spray on Underseal - 90 093 183/17 58 422.
Seal cavities with Wax - 90 016 651/17 58 993.