|
Headrest
for Rear Seat, Service Install
This
operation describes installation on single-part and two-part seat backrests -
Models 33, 34, 35, 36, 39, 43, 44, 45, 46, 49.
No
provisions are made for service installation on Models 35, 36, 45, 46 with
single-part backrest.
As of MY '89 front seat headrests are
installed.
Install
Press
upper backrest upholstery firmly with thumbs to locate guide sleeve mounting
hole in upholstery and frame.
Cut
cross in upholstery at mounting hole location.
Insert
sleeve in backrest (ensure correct installation position).
1 Seat frame mounting hole
2 Guide sleeve
3 Stop rod (headrest)
|
