Vauxhall Workshop Service and Repair Manuals

Seat Belt, Front, Replace

Models 33, 35, 37, 43, 45, 47

Remove

Remove rear quarter inner trim panel.

Remove sill panel.

Unbolt upper belt anchor from B-pillar.

         Models 33, 43

         Unbolt sliding bar from

         lower rear quarter panel.

         Models 35, 44, 47

         Unbolt lower belt anchor

         from rear quarter panel.

Unbolt inertia reel retractor from rear quarter panel frame and remove.

Unbolt lock from seat.

1     On Models 37, 47

2     On Models 37, 47 RHD modified swing arm

3     On Models 33, 35, 43, 45

4     On Models 33, 35, 43, 45

5     On Models 37, 47

Install

Install in reverse order.

Note:

Check all belt parts from time to time and replace damaged parts.

In case of accident, overstretched belts must be replaced by new belts.

Seat Belt, Front, Replace

Models 34, 36, 39, 44, 46, 49

Remove

Remove inner panel of B-pillar.

Unbolt belt anchor at height adjuster.

Unbolt lower belt anchor.

Unbolt inertia reel retractor and remove from cap.

Unbolt height adjuster from B-pillar.

Unbolt lock from front seat.

Install

Install in reverse order.

Note:

Check all belt parts from time to time and replace damaged parts.

In case of accident, overstretched belts must be replaced by new belts.

Seat Belt, Front, Replace

Model 43-B

Remove

Unscrew lower seat belt anchor from rear quarter panel.

Unscrew upper seat belt anchor from roll bar.

Remove rear quarter inner trim panel.

Unscrew and remove inertia reel retractor from rear quarter panel.

Bend up metal plates and pull belt through cut in rear quarter inner trim panel.

Unscrew belt lock from seat.

Install

Install in reverse order.

Note:

Check all belt parts from time to time and replace damaged parts.

In case of accident, overstretched belts must be replaced by new belts.