Vauxhall Workshop Service and Repair Manuals

Wind Deflector, Replace

On vehicles up to Ident. No. L 2547 101; L 5053 351

Remove

Crank roof to half-open position.

Remove wind deflector from operating unit.

A     2 retainers (both bearing points)

18    Wind deflector

23    Lifter (pull from bearing, can be used again when installing)

Install

Insert wind deflector with pre-mounted lifter in guide and secure retaining plates.

Use retaining ring to prevent bearing block on wind deflector springing out.

Wind Deflector, Replace

On vehicles as of Ident. No. L 2547 102; L 5053 352

Remove

Open glass cover completely.

Remove crank, handle well and crank drive.

       Do not change position of pinion.

Unscrew cover plate (1) and pull out forwards.

       (2 Phillips screws outside)

Drive out pin (1) outwards.

Remove wind deflector from cover plate.

Install

Analogously in reverse order.