Seal Ring of One Rear Wheel Hub (Disc Hub), Replace
On Models with Drum Brake
Remove wheel hub.
See operation "Rear Wheel Hub, Replace One".
Lever seal ring from wheel hub.
Press seal ring into wheel hub using suitable sleeve.
Thinly coat seal lip of new seal ring with Antifriction Bearing Grease 19 41 574 (90 001 812).
Install wheel hub.
On Models with Disc Brakes
Remove disc hub.
See operation "Disc Hub, Replace One".
Lever seal ring off disc hub.
Press seal ring into disc hub with suitable sleeve.
Thinly coat sealing lip of new seal ring with Antifriction Bearing Grease 19 41 574 (90 001 812).
Install disc hub.