Astra
TECHNICAL DATA
Test Brake Light Switch: After brake pedal travel of 20 ± 5 mm - measured on pedal, the brake lights must go on.
Pressure when Bleeding System with Brake Bleeder Unit: 150 kPa (1,5 bar) pressure
Duration of Leakage Test in Brake System: Approx. 10 minutes using brake pedal tensioner
Check Valve for Vacuum Line (Tube): Arrows on the valve body must point toward the intake manifold
Brake Pedal Travel: After changing brake disk pads (front) or operations on brake servo, pull push rod of brake light switch outwards - max. 7 notches.
Pedal Ratio: 4,5
Tandem Master Cylinder Dimensions:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||