Vauxhall Workshop Service and Repair Manuals

Carburettor, Remove and Install

Remove air cleaner.

Disconnect fuel and vacuum hoses.

Remove bowden cable for throttle valve control.

Disconnect vent hose for crankcase.

Remove bowden cable for choke valve control.

Remove carburettor fastening nuts and lift off carburettor over threads.

Place new gasket on intake manifold, position carburettor and fasten in place. Use new self-locking nuts.

Connect all hoses.

Always fasten fuel line with hose clamp.

Install bowden cables for throttle valve and choke valve free of tension.

Adjust idle speed and CO content in exhaust gas.