Vauxhall Workshop Service and Repair Manuals

OPERATIONS ON INSTALLED DOHC ENGINES

Starter, Remove and Install

Disconnect ground strap from battery.

Unscrew upper retaining bolts (transmission side).

Raise vehicle and remove intake manifold-engine block support.

Unscrew battery positive lead from solenoid switch. Disconnect wiring plug "Ter. 50" (engine side).

Note: "Ter. 15" on solenoid switch is unoccupied.

Unscrew lower retaining bolt (A).

Unscrew starter mounting bolt (B) from engine block Remove starter.

Install in reverse order.