vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: Data List - Test Step 05 INTAKE AIR TEMP. > < F0: Data List - Test Step 03 EXHAUST CODING

 

 

 

 

 

 

Test

TECH 1

Notes

Nominal Values

Pin

Possible

Step

Display

 

 

 

Trouble

No.

 

 

 

 

Codes

 

 

 

 

 

 

 

 

 

 

 

 

04

TRANSM. CODING

Ignition ON

 

21/19

 

 

 

MT vehicles

MT                          5V

 

-

 

 

AT vehicles

AT                          0V

 

 

 

 

 

 

 

 

 

 

Trouble-shooting:                                      Nominal Value:                       Cause of Fault:

(If nominal value is not attained)

MT vehicles

 

· Remove control unit plug                                        Ter. 42 occupied, 0V                         · Incorrect wiring harness

cable cover                                                                                                                               · Lead interruption between

Ter. 21 open, 5V                                    control unit Ter. 42 and ground

· Ignition ON                                                                                                                               · Control unit defective

 

· Check Ter. 21 and Ter. 42

optically and with multimeter

 

AT vehicles

 

· Remove control unit plug                                        Ter. 21 occupied, 0V                         · Incorrect wiring harness

cable cover                                                                                                                               · Lead interruption between

Ter. 42 occupied                                   control unit Ter. 21 and ground

· Ignition ON                                                                (to P/N switch Ter. H)                       · Control unit defective

 

· Check Ter. 21 and Ter. 42

optically and with multimeter

 

 

F0: Data List - Test Step 05 INTAKE AIR TEMP. > < F0: Data List - Test Step 03 EXHAUST CODING