vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: Data List - Test Step 17 IAC PULSE RATIO > < F0: Data List - Test Step 15 SPARK ADVANCE

 

 

 

 

 

 

Test

TECH 1

Notes

Nominal Values

Pin

Possible

Step

Display

 

 

 

Trouble

No.

 

 

 

 

Codes

 

 

 

 

 

 

 

 

 

 

 

 

16

TORQUE CONTROL

Engine at idle speed

 

51/19

 

 

 

MT vehicles:

INACTIVE

 

 

 

 

AT vehicles:

INACTIVE

 

75

 

 

 

 

 

 

 

 

Note:       On vehicles with AT, the engine torque is reduced during shifting via the pre-ignition.

Before disconnecting the transmission control unit, make sure that trouble codes were read out and noted.

 

Trouble-shooting:                                      Nominal Value:                       Cause of Fault:

(If nominal value is not attained)

 

· Ignition OFF

 

· Separate transmission control unit and                                                                                 · Interruption in cable from Motronic control

Motronic control unit from wiring harness                                                                             unit Ter. 51 to transmission control unit Ter. 4

 

· Using multimeter, measure                                                                                                     · Short circuit to ground in cable from

resistance at transmission control                                                                                             Motronic control unit Ter. 51 to

unit plug Ter. 4 and Motronic control                                                                                     transmission control unit Ter. 4

unit plug Ter. 51                                                        approx. 0 W                                         · Motronic control unit defective

 

 


Related Literature Units
-Table 2 - Trouble Code Table: Trouble Code 75

F0: Data List - Test Step 17 IAC PULSE RATIO > < F0: Data List - Test Step 15 SPARK ADVANCE