Vauxhall Workshop Service and Repair Manuals

Table 5, F5:ACTUATOR TEST

Note: Before carrying out F5:ACTUATOR TEST, trouble code 31 must be cleared.

Trouble-shooting:                                   Nominal Value:                     Cause of Fault:

(If nominal value is not attained)

· Remove plug from                                                11.5 V to 13.5 V                                 · Lead interruptions from

idle speed adjuster                                                                                                               - Control unit Ter. 4 to idle speed adjuster

- Control unit Ter. 37 to idle speed adjuster

Connect multimeter to

both terminals                                                                                                                     · Short circuit to ground in cable from control unit

Ter. 4 to idle speed adjuster

Ignition ON

· Measure inner resistance                                    8 to 10 W                                            · Idle speed adjuster defective

of idle speed adjuster with multimeter

If nominal values are attained       · Idle speed adjuster mechanically defective

(jams)