vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: Data List - Test Step 31 ENG. OIL TEMP.SW > < F0: Data List - Test Step 29 A/C INFORMAT.SW.

 

 

 

 

 

Test

TECH 1

Notes

Nominal Values

Possible

Step

Display

 

 

Trouble

No.

 

 

 

Codes

 

 

 

 

 

 

 

 

 

 

30

A/C COMPRESS.SW.

Ignition ON

OFF                     0 V

 

 

 

 

 

 

 

 

Engine at idle speed

OFF                     0 V

 

 

 

Actuate AC switch

 

-

 

 

The compressor now switches

 

 

 

 

on

ON                      12 V

 

 

 

 

 

 

 

 

Note:

The lead to Ter. 40 on the control unit is present on all vehicles, but on vehicles without air conditioning it is unoccupied in the wiring harness.

 

 

Trouble-shooting:                                 Nominal Values:                      Cause of Trouble:

 

Vehicles without AC

 

· Remove control unit plug lead cover.            0 V                                                         · Short circuit against voltage

Measure voltage at Ter. 40 with multimeter                                                                        in lead to Ter. 40

 

Vehicle with AC

 

· Remove control unit plug lead                                                                                        · Short circuit to ground or interruption in lead

cover. Check voltage at Ter. 40                                                                                        from control unit Ter. 40 to compressor

with multimeter                                                                                                                   · Control unit defective

- Air conditioning OFF                                       0 V

- Air conditioning ON                                        12 V

Compressor switches on

 

F0: Data List - Test Step 31 ENG. OIL TEMP.SW > < F0: Data List - Test Step 29 A/C INFORMAT.SW.