OHC Petrol Engines
Piston Wrist Pins
12 ST, 13 N, 13 S,
C 13 N, 13 NB
14 NV, C 14 NZ,
16 SV, C 16 LZ,
E 16 NZ, C 16 NZ
16 SH, 18 E,
C 18 NT, C 18 NE
18 SE, E 18 NV,
20 NE, 20 SEH,
C 20 NE
Length mm
Diameter mm
65
20
55
18
70
23
61.5
21
Design
shrink-fit in con-rod
Play mm
in piston
0.007 - 0.010
0.011 - 0.014
in con-rod
none
Installation
In order to install the wrist pin, heat the connecting rod to approx. 280°C using hot plate or Electric Kiln MW 101. this temperature must not be exceeded.
Use Thermocolour Pencil No. 2815/280.
DOHC Petrol Engines
C 20 XE, 20 XE, 20 XEJ
floating bearing
Play mm in piston
0.003 - 0.010
0.015 - 0.030
sliding seat