Adjusting
value 12
SC
|
Valve
clearance
Inlet 0,15
mm
Exhaust 0,25
mm
Measured
with engine at operating temperature
|
Distributor
dwell angle 50 + 3°
at
min. 4 mm contact gap
Distributor
dwell time 56 + 3%
|
Ignition timing Mark
on crankshaft pulley must align with bar on timing case cover
|
Spark plug
electrode gap 0,7 -
0,8 mm
|
Compression The
difference in pressure between the individual cylinders in an engine must not
exceed 1kp/cm2
|
Pressure lost test Pressure
loss per cylinder with engine in perfect condition
no
more than max. 25%
i.e.
at piston max. 5%
and
at valves max. 20%
|