Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

04

SELECT ACTUATOR SOLENOID 2-3

Ignition ON

Engine OFF

Vehicle stationary

Engage parking brake

Selector lever in "N"

Press key F5 in the system main menu, select the desired test with the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

Note:

After the test is started, the solenoid valve for the 2-3 shift is automatically actuated at a frequency of 0.5 Hz. 5 test cycles are performed.

During actuation, TECH 1 determines whether the solenoid valve is functioning correctly.

Control unit terminals:

AF 14/20/22:    3, 35

AF 13:                1, 35

SOLENOID 2-3

TEST OKAY!

26, 28

Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

See test step no. 04