15
|
Converter clutch does not engage
|
· Brake lamp switch incorrectly adjusted
· Solenoid valve for converter clutch defective
· Brake light switch signal not present
· Fluid leak in fluid circuit of converter clutch
· Torque converter defective
· Valve body defective (pressure regulator,
modulator valve, secondary regulating valve,converter control valve, shift
valve 1-2/3-4)
|
· Adjust brake lamp switch
· Carry out Actuator Test with TECH 1 (section 5.7
no. 05)
· Replace brake light switch
· Locate/replace leaky part
· Replace torque converter
· Replace valve body with pressure regulator
See Service Instructions
|