vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Trouble-shooting Table for Mechanical/ Hydraulic Faults - Test Step 19 > < Trouble-shooting Table for Mechanical/ Hydraulic Faults - Test Step 17

Trouble-shooting Table for Mechanical / Hydraulic Faults

 

 

Test Step

Fault Symptoms

Possible Cause of Fault

Notes for Remedy

18

No 2-3 upshift

 

 

·   Selector lever in position "2"

·   "Emergency program" activated

·   "Winter program" activated

 

·   Selector lever position switch/cable incorrectly adjusted

·   Solenoid valve for 2-3 shift or shift valve in valve body defective

 

 

·   Fluid leak in clutch C 3 or in fluid circuit (AF 14/20/22)

·   Fluid leak in clutch C 0 or in fluid circuit (AF 13)

 

·   Read out trouble code

·   Carry out Actuator Test with TECH 1 (section 5.7 no. 04)

·   Adjust selector lever position switch/cable

·   Carry out Actuator Test with TECH 1 (section 5.7 no. 04); replace valve body with pressure regulator

·   Locate/replace leaky part

     (AF 14/20/22)

·   Locate/replace leaky part

     (AF 13)

 

See Service Instructions

 

 

 

 


Related Literature Units
-F5:ACTUATOR TEST - TEST STEP 04 SELECT ACTUATOR SOLENOID 2-3

Trouble-shooting Table for Mechanical/ Hydraulic Faults - Test Step 19 > < Trouble-shooting Table for Mechanical/ Hydraulic Faults - Test Step 17