· The
voltage level recognized by control unit at the relevant control unit output
is High (12 V), although control unit output was set at Low (0 V; solenoid
valve is not actuated)
(short circuit to battery voltage
or interruption)
· The fault
is recognized when the solenoid valve is not actuated
· With
ignition ON and after starting engine, the fault is immediately recognized
If
trouble code 28 was recognized, the following gears are still shifted in the
following driving stages
(emergency
program):
Automatic
Transmission AF 14 / 20:
"Driving
stage" (gear): "D" (4), "3" (3), "2" (3),
"1" (1)
Automatic
Transmission AF 13 / 22:
"Driving
stage" (gear): "D" (4), "3" (4), "2" (3),
"1" (1)
|